Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)
TIME7240 Vibration Tester
| Previous | 1 / 4 | Next |
Acceleration:5Hz~10000Hz
Standard delivery
Main unit
Power adapter
Vibration probe TSV-03
Magnetic base
Protection Sheath for main unit
USB communication
SD Memory card(2G)
Instruction manual
TIME certificate
Warranty card
Optional accessories
Photoelectric keyphasor transducer
RS232 cable(for printing)
TPUP-NH thermal printer
Needle groupware
Velocity:5Hz~1000Hz
Displacement:5Hz~500Hz
Key Features
Three channels(CH1, CH2 and REV) are available, the vibration of any two of the three directions including X axis, Y axis and Z axis can be tested.
Five measuring modes: three parameters measuring£¨AVD mode£©, dynamic time domain waveform(TIME mode), dynamic spectrum measurement£¨FFT mode£©, data sampling£¨Sample mode£©, rotation speed measurement( REV mode).
The peak value of acceleration, velocity and peak to peak value of displacement are measured.
Preset the filter’s cut-off frequency of pass band, frequency step is 100Hz.
Dynamic display the waveform in real time.
Dynamic display the vibration frequency.
Continuous data sampling for 20 seconds
With powerful data management:50 points stored, the measured data of each point is stored in files, users can review the vibration parameters, waveform, frequency data sampling and rotation speed.
Connected with printer to print out measured data, waveform and spectrum chart
Technical Specification
Key Features
Three channels(CH1, CH2 and REV) are available, the vibration of any two of the three directions including X axis, Y axis and Z axis can be tested.
Five measuring modes: three parameters measuring£¨AVD mode£©, dynamic time domain waveform(TIME mode), dynamic spectrum measurement£¨FFT mode£©, data sampling£¨Sample mode£©, rotation speed measurement( REV mode).
The peak value of acceleration, velocity and peak to peak value of displacement are measured.
Preset the filter’s cut-off frequency of pass band, frequency step is 100Hz.
Dynamic display the waveform in real time.
Dynamic display the vibration frequency.
Continuous data sampling for 20 seconds
With powerful data management:50 points stored, the measured data of each point is stored in files, users can review the vibration parameters, waveform, frequency data sampling and rotation speed.
Connected with printer to print out measured data, waveform and spectrum chart
Technical Specification
| Sensitivity of Acceleration transducer (mVrms/g) | Acceleration (m/s2) | Velocity(mm/s) | Displacement(μm) |
| 1.0~9.9 | 1-2,000 | 1-2,000 | 10-20,000 |
| 10~99 | 0.2-200 | 0.2-200 | 5-2,000 |
| Frequency range | Acceleration:5Hz~10000Hz | ||
| Velocity:5Hz~1000Hz | |||
| Displacement:5Hz~500Hz | |||
| Rotation Speed | 300~60000RPM | ||
| Error | ±5% | ||
| Battery | Li battery(continuous working for 8hours) | ||
| Operating temperature | 0¡æ~40¡æ | ||
| Humidity | ≤80%RH | ||
| Dimensions(mm) | 223×122×38 | ||
| Weight(g) | 606 | ||
Standard delivery
Power adapter
Vibration probe TSV-03
Magnetic base
Protection Sheath for main unit
USB communication
SD Memory card(2G)
Instruction manual
TIME certificate
Warranty card
Optional accessories
Photoelectric keyphasor transducer
RS232 cable(for printing)
TPUP-NH thermal printer
Needle groupware
