TQC sheen - Bending / Impact / Cupping Testers - Impact Test Paint Strength Testers Coating / Paint Testing Supplier, Suppliers, Supply, Supplies ~ Obsnap Instruments Sdn Bhd

Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.

+603-5621 5786

+603-5621 5829

sales@obsnap.com

+60122185651 (Enquiry)

+60162233687 (Vacancy)

Message Us

TQC sheen - Bending / Impact / Cupping Testers - Impact Test

21 / 42

Quantity

Add Quotation

The TQC Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according DIN/ISO 6272, ASTM D2794 and ASTM G14

Mandatory test in Qualicoat, QIB and GSB accredited laboratories.

Standards for impact testing
Below mentioned standards are a list of the possible standards. If the required standard is not listed below please contact TQC to check if adoption of this standard is possible*:

	SP1880	SP1890	SP1891	SP1895	SP1896
Type of Impact	Indirect	Direct	Direct	Direct	Direct
ISO 6272-1:2002		•
ISO 6272-2:2002	•
ISO 6272:1993			•
ASTM D 2794:2004	•
ASTM G14-04				•
JIS K 5600-5-3:1989	•	•
EN 12206-1:2004	•		•	•
EN 13523-5:2001	•	•
AAMA 2605-05	•		•
Qualicoat 2006	•		•
Qualisteelcoat 2008	•		•
Canadian Standards Association (CSA)					•

* Conformation to a required standard depends on the impact tester type. The combination of items can change to comply with another standard.

Features:

The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in.

ORDERING INFORMATION

Art. No. SP1880
TQC Impact Test according to ISO 6272-2 and ASTM D2794
Type: Indirect Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø12.7 mm , punch Ø15.9 mm, weight 1 kg, die Ø16.3 mm. Max test panel thickness: 4,5 mm

Art. No. SP1890
TQC Impact Test according to ISO 6272-1
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg. Max. test panel thickness: 1,25mm

Art. No. SP1891
TQC Impact Test according to ISO 6272-1 and ASTM D2794 (before 1993)
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, clamp device, ball Ø20 mm, die 27mm, weight 1 kg, ball Ø15.9 mm, die 16.3mm, weight 0.9 kg

Art. No. SP1895
TQC Impact Test according to ASTM G14
Type: Direct Impact Tester
Content: Base plate assembly, guide tube, release collar, punch Ø15.9 mm, weight 1.361 kg and a V-notch vise with spring clamp to hold the pipe

Art. No. SP1896
TQC Impact Test according to CSA

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Ship to Name
Shipping Address
Messages*

available in