Visit
Official Website

Obsnap Instruments Sdn Bhd
29A, Jalan SS 15/4C, 47500 Subang Jaya, Selangor, Malaysia.
+603-5621 5786
+603-5621 5829
+60122185651 (Enquiry)
+60162233687 (Vacancy)

Hanatek - Precision Thickness Gauge (LAB)

Previous 22 / 36 Next

Quantity
Add Quotation


The Hanatek Precision Thickness Gauge (LAB) FT3-V is specifically designed for use by testing laboratories. Compliance to multiple standards is achieved by varying the weight applied to the measurement platen and interchangeable measuring heads to vary the contact area.

The instrument is specifically designed to quickly and accurately measure the thickness of a variety of substrates including film, paper, board, foil, tissue and textiles.

Operated via an intuitive touch screen interface the instrument will allow the user to define batch size, dwell time & measuring speed.

Full test statistics can be easily viewed or printed to label for easy documentation control.

Contact pressure varied by adding additional weights to measurement platen. Contact area is  variable from 6 - 50 mm

Precision Thickness Gauge (LAB) Features

Test Parameters
Physical test parameters can be factory configured according to International Standards or customer requirements. Measurement speed and dwell time are controlled by user defined parameters.

  • Momentum and profile of measurement head
  • Measurement pressure
  • Measurement dwell time

Instrument
The instrument is linearised throughout its measurement range using a multi point calibration.
Flatness of measurement head/anvil <0.1µm Typical parallelism <1µm

  • Accuracy, Linearity, Calibration
  • Flatness/Parallelism of Measurement Area

Operator
The Hanatek instrument provides full statistical analysis of data. The optional printer allows a time/date stamped results label to be attached to job sheet or retained samples

User defined routines or the optional footswitch mean hands free operation for easy sample manipulation

  • Incorrect recording and analysis of results
  • Sample handling and measurement technique

Temperature
Temperature stability circuitry ensures the instrument electronics reach optimum conditions before testing.

Plastic Film

BS 2782-6
Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet

DIN 53370
Testing of plastics films - Determination of the thickness by mechanical scanning

ISO 4593:1993 Part A OR B
Standard Guide for determination of Thickness of Plastic Film Test Specimens

Paper & Board

ISO 534 : 2005
Paper and board. Determination of thickness, density and specific volume

DIN 53105
BS EN 20534

Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board

TAPPI T 411
Thickness of Paper and Paperboard (Soft Platen Method), Test Method T 551 om-06

SCAN P7/P31
FEFCO No 3
ISO 3034

Corrugated fibreboard. Determination of the thickness of corrugated fibreboard

Self Adhesive Tape

DIN EN 1942
Self adhesive tapes - Measurement of Thickness

Tissue

BS EN 12625-3
Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density

SCAN P47
BS 7387

Method for determination of the bulking thickness, apparent bulk density, compressibility and compressibility index of soft creped tissue paper

Textile

ISO 5084
Determination of thickness of textiles and textile products

ASTM D1777
Part 1, 3, 4 OR 5

Standard Test Method For Thickness of Textile Materials

ISO 2589
Leather - Physical and mechanical tests - Determination of thickness

Gaskets

ASTM F36-99
Standard Test Method for Compressibility and Recovery of Gasket Materials

Floor Coverings

EN428
Resilient floor coverings - Determination of overall thickness

Flexible Packaging

ASTMF2251
Standard Test Method for Thickness Measurement of Flexible Packaging Material

 

Features

Resolution
  • 0.1 µm

Repeatability

  • Better than 0.4 µm*

Reproducibility

  • Better than 0.8 µm*

Measurement Range

  • 0-4000† µm
  • †0 – 19000 µm extended range instrument also available

Weight

  • 10kg (max)
Dimensions
  • (h) 285 x (w) 302 x (l) 285 mm

Output

  • RS232

Power

  • 110/220V 50/60 Hz

Accessories

  • All Hanatek FT3 gauges are supplied with a UKAS traceable calibration certificate and traceable 2000 µm and 500 µm checking gauges

Options

  • Results printer, footswitch, additional weights

*Dependant on operating conditions and instrument configuration


 


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   


You have 0 items in you cart. Would you like to checkout now?
0 items
available in
Subscribe Newsletter